Humbrol Europa (precio EUR)

Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability. Coverage: Depends on application and thickness of coats. Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Drying Time: 15-30 minutes How To Clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Acrylic Thinner. Product is permanent once dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml tins for bigger jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours in 14ml tinlets, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in smaller 14ml tins for smaller jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours in 14ml tinlets, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in smaller 14ml tins for smaller jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability. Coverage: Depends on application and thickness of coats. Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action. Drying Time: 15-30 minutes How To Clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Acrylic Thinner. Product is permanent once dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml tins for bigger jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol Acrylic Paint is ideal for many paint tasks around the home. Developed for plastic kit modellers, the paint is water based, fast drying and safe in use. Simple to mix colours to obtain further shades too, and the paint is suitable for airbrushing. The perfect general paint for all craft and modelling uses. Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other surfaces. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Brush straight from the tin or Airbrush with a suitable thinner such as water. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry. Matt, Satin, Gloss, Metallic and Clear finishes are available.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml tins for bigger jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours in 14ml tinlets, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in smaller 14ml tins for smaller jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

Humbrol Acrylic Paint is ideal for many paint tasks around the home. Developed for plastic kit modellers, the paint is water based, fast drying and safe in use. Simple to mix colours to obtain further shades too, and the paint is suitable for airbrushing. The perfect general paint for all craft and modelling uses. Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other surfaces. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Brush straight from the tin or Airbrush with a suitable thinner such as water. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry. Matt, Satin, Gloss, Metallic and Clear finishes are available.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml tins for bigger jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

Humbrol Acrylic Paint is ideal for many paint tasks around the home. Developed for plastic kit modellers, the paint is water based, fast drying and safe in use. Simple to mix colours to obtain further shades too, and the paint is suitable for airbrushing. The perfect general paint for all craft and modelling uses. Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other surfaces. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Brush straight from the tin or Airbrush with a suitable thinner such as water. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry. Matt, Satin, Gloss, Metallic and Clear finishes are available.

Humbrol has been the modellers standard for decades. Originally produced in a small range of colours for painting bike frames, it now comes in over 80 colours, and is perfect for modellers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage. Also available in larger 50ml tins for bigger jobs. Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates. Matt, Gloss, Satin, Metallic, Metalcote finishes are available (finish varies by colour). Matt, Gloss and Satin clear varnishes are also available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability. Coverage: 14ml tin covers approx. 0.3m² depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colours are designed to be polished when fully dry. Drying time: Gloss: 1-2 hours touch dry; up to 24 hours for hard dry. Matt & Satin: 20-40 mins touch dry; up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight). How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.

These new Acrylic Dropper Bottles enable easier colour blending using the bespoke Humbrol Paint Palette (AG5111). Usage: A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. Application: Use in combination with the Humbrol Paint Palette(AG5111). Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner. Drying Time: 1-2 hours hard dry, allow longer for Gloss and Metallic finishes. How To Clean: Acrylic Thinners or water when wet, cellulose when dry.